Avago-technologies Cache Protection for RAID Controller Cards Manual do Utilizador descarregar pdf (Página 80)

Avago Technologies

- 80 -

Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide

May 2015

Chapter 2: Installing the Cache Backup Products

Installing the LSIiBBU09 Unit

2.6.2.3 Reinstalling the RAID Controller on the Motherboard

Follow these steps to reinstall the RAID controller on a motherboard.

1. Make sure that the power to the chassis is still turned off, the power cords are unplugged, and the chassis is

grounded and has no AC power.

2. Install the RAID controller in a PCI Express slot on the motherboard, as shown in the following figure.

NOTE Some PCI Express slots support only PCI Express graphics cards. A RAID

controller installed in one of these slots will not function. Refer to your

computer documentation for information about the PCI Express slot.

3. Press down gently, but firmly, to seat the card correctly in the slot.

4. Secure the controller to the computer chassis.

Figure 51 Reinstalling the RAID Controller

5. Replace the computer cover, and reattach the power cords.

6. Turn on the power to the computer.

Edge of

Motherboard

PCI Express

Bracket

Screw

Press

Here

Press

Here

3_00891a-00

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 138 139

Sem comentários

Avago-technologies Cache Protection for RAID Controller Cards Manual do Utilizador Página 80